![BCSA National Dinner 2019](/upload/headers/News header.jpg)
BCSA News and Insights
DNV Component Certification
Posted by Tension Control Bolts Ltd
27/01/2025
Category: General
Following an extensive review & audit process TCB Ltd have achieved DNV Component Certification. Tension Control Bolts Ltd have successfully supplied over 9 million assemblies to the wind energy sector and this new certification provides additional quality assurance. The certification is relevant to wind energy, offshore and onshore, wave, tidal & solar. For customers looking to specify HRC bolts and Studs, they can be assured of component integrity from Tension Control Bolts Ltd mitigating against risk. This is particularly invaluable for pioneering new projects which are pushing the boundaries of technical and engineering knowledge. Steve Jones : Technical Director at Tension Control Bolts Ltd commented “… TCB Ltd are at the cutting edge of renewables, this DNV certification builds on many years of commitment to advancing the sector, with an established environmentally friendly bolting assembly the Greenkote® TCB..”
DNV is the leading independent expert in component certification for the renewables sector. DNV advances safety, sustainable performance and sets industry benchmarks.
![DNV Certification](/upload/company-profile/tension-control-bolts-ltd/190bba8a-e3a1-4b17-b1e1-dbe408d9da44.jpg)
Previous article
23/01/2025
![Tensions Control Bolts logo](/upload/Company Logos/Tension Control Bolts.jpg)
A warm welcome to our new BCSA Industry Member – Tension Control Bolts Ltd
Tension Control Bolts Ltd, based in Wrexham, Wales and has been operating for over fifty years. They were originally involved in the manufacture of standard bolts and then moved into TCB’s, which have virtually replaced the original standard high strength friction grip bolts and nuts.
Next article
03/02/2025
![Gary Simmons of William Hare](/upload/headers/Gary Simmons.jpg)
President's Column February 2025
In October 2023, a steel-framed car park at Luton Airport Terminal 2 was devastated by a fire started by a fault in a diesel-powered vehicle on level three. Thankfully, there was no loss of life or serious injury, although several firefighters and a member of the airport staff were taken to hospital due to smoke inhalation. However, the fire did destroy over one thousand vehicles and caused the collapse of some sections of the upper-level car park floor